A pin in the Superfy platform is any container, bin, or other asset shown on the map. These can be smart assets (sensor enabled), managed assets (no sensor, but rules associated) or standard assets (no sensor and no rules associated).
Don't have the app? Learn More.
Don't have a login? Please reach out to your Company Admin, Account Manager, Customer Success Manager, or email support@superfy.com. They will be able to assist you in creating a login for your account.
- Open the Superfy App on your phone.
- The GPS on your phone will detect your current location, which will then be displayed on the map as a blue dot.
If adding a pin remotely, you can use the Magnifying Glass located at the left-hand side of the Map View to search for the address of where you want to add the pin. Select Streets/Location when searching addresses.
- At the bottom of your phone screen, click Add Pin and drop the pin in the location
- Complete the below information by selecting from the drop down arrows to select pre-sets or add new item on the New Container form.
-
-
- Name - use your preferred naming convention (i.e., Bin ID)
- Zone
- Icon
-
-
-
- Images - add pictures of the installation.
- Click on Camera Image to take a photo.
- Add Title (use bin name)
- Add Description - this is optional!
- Click Done.
- Click Save
- Images - add pictures of the installation.
-
- Include clear and detailed picture showcasing the installation of the sensor, providing a visual representation of where and how the sensor was installed.
- Pictures of the container/bin (type, ID number etc...)
- Include clear and detailed picture that showcase the environment surrounding the container/bin. These pictures will provide a visual representation of the area where the container/bin is located, helping to provide context and a better understanding of its surroundings.
-
-
- Asset Type
- Asset Tags - this is optional.
- Sensor - assign one of the available sensors to the pin
- Select Sensor from drop down list (or type in the serial number) and click Done.
-
Pins can be added to the map without allocating a sensor. If no sensor attached to the assets you can skip this step.
If you choose to allocate a sensor, it's crucial to:
- Ensure that the G2 Fill Level Sensor is turned ON. Learn More
- Take a Manual Reading after pin is added to the map to ensure a heartbeat is being sent from the sensor to the platform (confirm date and timestamp matches) and verify that the asset fullness level matches what is physically in the bin. Learn More
After adding a pin, you will notice a Grey icon on the map. If the sensor is turned ON, the icon will change colour to one of the options below.
-
-
- Asset Serial Number - Use your own internal Asset Identification Number if applicable.
- Vendor and Store - if applicable
- Fill Height - add container/bin Fill Height in cm
- Fill Gap - add container/bin Fill Gap in cm
-
To take Fill Height and Fill Gap Measurement, Learn More
- Click Save
You can only add One picture at this stage. To add more pictures:
- Search for the Pin by using the Magnifying Glass at the top of the Map View or click on Explorer at the bottom of the screen.
- Click on the Pin and then click View
- On the Container Details, click Images again
- Click + to add more photo
- Click the Back button to add more photos.